System Deposition for Hollow Membrane

Casting Knife Film Applicator
October 29, 2015
Experimental setup for flat and hollow membrane testing
October 29, 2015
Show all

System Deposition for Hollow Membrane

System production for hollow membrane

The following product could be designed according to the client requirements

Datasheet

Part A –  Polymeric Solution delivery system

Storage Tank:
Mod. SS10150D Steel AISI 316 storage tank: double chamber with load capacity around 1 liter, two GAS coupling of ¼” for inlet and output of cooling and heating liquid (from -20°C to 150°C) with a maximum pressure of 10bar, GAS coupling of ¼” for exhaust product. Flange for steel AISI 316 storage tank with a 3/8” GAS inlet in the middle including tap, two holes of ¼” GAS for lodging manometers, seal lodging, O-ring made f FETFE and/or Silicon/Viton;

Basic Installation stainless steel  AISI 316L:

  • Analog Pressure Gauge: AISI 316 steel made; e.s. 6bar; for tank with connection
  • Analog Pressure Gauge: AISI 316 steel made; e.s. 25bar; for branch output of the gear pump
  • AISI 316 steel holder for storage tank
  • AISI 316 steel holder for tank/engine/pump, plan size 600X12X280mm
  • All-steel AISI 316 pipe line: ø 6mm
  • Ball valves made of AISI 316 steel
  • Reducer Par240M3 or similar R.1/34,6 W140 N2 MIN=4 N2 MAX=80 torque Nom.13,8Nm V230 single phase
  • Speed Regulator for reducer Par240M3 Mod.RM220ME o similar, power supply 220Vac

Gear Pumps:
n.1 Mod. 0,2 cc/rev – Tmax 80°C

 

Part B –  Bore Fluid Delivery System

Storage Tank:
Mod. SS10150D Steel AISI 316 storage tank: double chamber with load capacity around 1 liter, two GAS coupling of ¼” for inlet and output of cooling and heating liquid (from -20°C to 150°C) with a maximum pressure of 10bar, GAS coupling of ¼” for exhaust product. Flange for steel AISI 316 storage tank with a 3/8” GAS inlet in the middle including tap, two holes of ¼” GAS for manometers lodging, seal lodging, O-ring  FETFE and/or Silicon/Viton;

Basic Installation  stainless steel AISI 316L:

  • Analog Pressure Gauge: AISI 316 steel made; e.s. 6bar; for tank with connection
  • Analog Pressure Gauge: AISI 316 steel made; e.s. 25bar; for branch output of the gear pump
  • AISI 316 steel holder for storage tank
  • AISI 316 steel holder for tank/engine/pump, plan size 600X12X280mm
  • All-steel AISI 316 pipe line: ø 6mm
  • Ball valves made of AISI 316 steel
  • Reducer Par240M3 or similar R.1/34,6 W140 N2 MIN=4 N2 MAX=80 torque Nom.13,8Nm V230 single phase
  • Speed Regulator for reducer Par240M3 Mod.RM220ME o similar, power supply 220Vac

Gear Pumps:
n.1 Mod. 0,2 cc/rev – Tmax 80°C

Contact Us

Name & Surname (required)

Email (required)

Subject (required)

Your Message